Nic's Porsche 911: Take a Chance on the 996



Some of us get our start tracking in unusual equipment. Nic Gerardi began with a Volkswagen Jetta—a car which, by his admission, was “never really made for this sort of stuff.”

That wasn’t quite the cask with this 996.1. This 2001 Porsche 911 was, as he put it, “Just OK.” Being a base C2 Carrera, it was quite soft—more of a grand tourer, really. Running all-season tires didn’t help much there, either. “It pushed so much; it really wouldn’t leverage the rear,” he noted.

The fact that it was so soft allowed him to hustle the car over the curbs in a way he never felt comfortable doing in the Jetta. Part of that sense of security came from the general feeling of robustness he had when driving the 911—a car he believed to have more potential.

Wisely, Nic recognized that the driver was the limiting factor at that stage, so rather than begin by adding performance modifications, he decided to choose a collection of safety improvements. A four-point DAS Sport bolt-in rollbar, a Recaro pole Position ABE seat, and an OMP six-point harness gave Nic the sense of security he was after—a wise choice that helped him push the car to the limit and understand the Porsche’s demands.

After making the safety upgrades, he improved the wheel and tire combination—again for similar reasons. The wider set of APEX SM-10 wheels and Continental Extreme Contact DWS worked to help him learn the Porsche’s peculiarities. “I didn’t want to over-tire the car early on, because running high-grip tires can, up to a certain place—maybe eight-tenths, allow you to practice bad habits. I wanted to know it more intimately before I threw on some R-compounds. Plus, these tires are usually pretty communicative, so they made it a little easier to learn the car.”

There were three more factors needed to achieve a greater understanding of the 911. The first two were consistency and durability. For those factors, he installed a set of stainless brake lines and Pagid RS29 pads which, even at Laguna Seca, would not fade. The final touch: improved body control and sharper responses. Though some might not think it, a stock, base 911 built during the Clinton Administration is a pretty floppy thing.

That’s why it took relatively little to get the car feeling five times more athletic than it had stock. Along with Function First semi-solid engine and transmission mounts, he replaced all the suspension bushings with stock parts, then added a mild set of H&R Street Performance coilovers. In conjunction with factory GT3 sway bars front and rear, these few tweaks made a vast difference in the way the car would rotate—how it “leverages the rear,” as Nic puts it. The car’s habit of understeering on entry and exit was now diminished enough to help him point the car where he wanted it more of the time.

In the past two years, he’s run the car largely in this configuration. He’s learned a lot about the car, and now feels it’s undersprung. The reason is that making the transition from brake release to the mid-corner/coast phase is hard to replicate. At least the 911 is willing to oversteer a little more now, though the problem is that it oversteers almost too readily.

He’s toyed with the handling somewhat by running a smaller tire. Downsizing from the aforementioned Apex wheels to a set of factory 17” 996 wheels measuring 17x7” and 17x9” wheels wearing 225 and 255-section Maxxis RC-1s, respectively. This tire change has made the car more neutral.

It’s a problem he aims to solve with stiffer, tailored coilovers in the near future. For now, he’s quite confident lapping this car—not only because he knows it, but because of its demonstrated reliability.

The M96 motor is a cause for concern due to the possibility of its IMS bearing failing and incurring a very costly rebuild. Nic went ahead and replaced the factory item with an LM Engineering replacement bearing, and was happy to report that the original single row bearing OE item looked fine after it was removed. “It really only happens in a 8% of MY 2001 and beyond engines—a small percent of engines I’ve heard and read about,” he added.

The only other engine modification he made was an FCD Brombacher extended sump, which adds another half quart of capacity to the motor and safeguards it from starvation when sticky tires are added. Beyond that, the 911 has been a vision of reliability. Aside from a water pump, nothing has failed.

“The car runs strong. The brakes haven’t given me a single problem, there’s good power available all the time, it never overheats, and it’s fairly easy on consumables.”

At the moment, Nic has no intention of modifying the motor to make more power. “I’m going to leave the powertrain stock and focus on getting the suspension to work for me and my driving preferences.” Now that he’s learned the car’s habits, it’s time to get it to work a little more with him. If there’s one way to get acquainted with a car, this is it.






Previous
Previous

Joey's Yaris: Giving the Family Car a New Lease on Life

Next
Next

Adam's S13 Coupe: Silvias Do More Than Slide