Abdul’s E46 M3: Checking All Boxes
A competitive driver, totally dedicated to improving his skillset in the shortest time possible benefits from two distinct things: a dependable car and guidance from experienced mechanics.
“I wanted to be able to adapt to different cars quickly, so I tried most of the usual suspects that first year,” he recalled.
Abdul Osmani recognized that there were about a half-dozen well-trodden paths into high-performance driving after sampling the vehicles during his track day foray. Some platforms aren’t as well supported, as as a brief fling with a GT350 taught him, and there’s a good reason for this. “The Mustang taught me a lot about the problems with modern cars: they’re heavy, they chew up tires, and sometimes parts are hard to come by. I realized quickly that lightweight was the way to go.”
In order to advance at his desried rate, he had to conform and buy a proven platform. This realization pushed him towards an S2000, and it also helped him recognize the one other impediment to his success: his limitations as a mechanic.
So, in the name of expedience, he decided to turn to RCrew for their help. They provided him with a prepped track car and allowed him to apply himself to his new craft without distractions. The S2000’s sharp responses would help him improve, but RCrew’s support ensured his ass was glued to that Recaro seat — and nothing would do more for his advancement than practice.
COVID was starting to dwindle by this point, and now with a largely sorted car that could take the track abuse, he logged as many laps as some professional drivers do in a similar timespan. “I had the means to dedicate myself then, so between 2021 and 2022, I completed 41 track days.”
He’d made the major strides towards his ten-thousand hours and built the muscle memory needed to move into competitive motorsport, and setting fast laps began to lose a little bit of its luster. He decided that the next step was endurance racing, for which the Honda was not as well suited to as were some other popular platforms, he realized.
As the popular HPDE options go, there aren’t many cars with the peak grip and pointiness of the S2000, which makes it a serious contender when pursuing PBs. However, due to its low torque, he had to consider an alternative of a similar vintage.
“As fun as it was to set my fast laps, the chess match of enduros was a new challenge I needed; honing my racecraft would be more rewarding, I believed.”
The E46 M3 was the versatile, if slightly compromised, vehicle that would make a successful and similarly streamlined transition into longer races probably. “There were a few reasons why I thought that. For one, the M3’s easier to drive thanks to more torque and better ABS, and the parts are widely available. Plus, it’s eligible for a few different classes with just a tune. I knew this platform would make it easier to accrue the race laps I was after.”
Once he could commit to a plan, he discussed his options with RCrew, who took his provided chassis and whipped it into racing shape in four months. Part of the reason they could proceed so quickly was because, like with Jacek’s rock-solid E46, they used their tested and proven track car package, albeit with a few extras.
“We went with MCS two-way remotes, AP 5000R Pro brakes at both ends, a TC Design cage, RCrew headers and exhaust, a Bimmerworld rear wing, an RCrew splitter, Volk TE37 wheels: the off-the-shelf RCrew starter pack,” he laughed. “On top of the usual parts, we jumped straight into sphericals, a carbon roof, fiberglass doors, and an AIM dash.”
Weighing in at 2,750 pounds with half a tank of fuel and producing 310 horsepower makes the M3 the perfect middleweight that, as mentioned earlier, can run in a number of classes with as little as a change in engine calibration. It might not have the same degree of mid-corner grip or the turn-in immediacy as the car which it replaced, but the package is better suited to long-distance speed, net-net.
But in full time trials trim, the package still puts down sensational single laps. On a set of Hoosier R7s, Abdul’s 1:34.57 at Laguna Seca is remarkable — especially since he acknowledges that he made a few mistakes that lap. The mid-corner understeer in Turns 3, 4, and 9 “might’ve been caused by being a little impatient on the throttle.”
Furthermore, he’s convinced the slicks might benefit from a little more than the 3.8 and 3.0 degrees of negative camber he’s running at the front and rear axle, respectively. Along with a slightly torquier brake compound — he’s been running enduro pads — the turn-in phase might be shortened, which in combination with more mid-corner grip, might help him find another second.
“I didn’t think 1:33s were possible before this lap, but now, if my stars align…” he hinted.
The salient point is that the car is almost completely sorted, and its dependability has helped him get to the point where he’s able to isolate the smallest setup problems and focus completely on his driving.
This stoutness, plus its kindness to its consumables, has made him convinced that there isn’t another option for someone in his position. “It’s funny that this twenty-year-old car is one of the most sensible options nowadays,” he declared.
His performance in Speed SF’s inaugural enduro endorses this statement. After finishing third, he’s committed to the entirety of next year’s season. “I found the 2.5 hour-length perfect. In comparison to my experiences with longer enduros, the 2.5-hour format makes logistics and planning simple and cost effective. It’s almost like a really long advanced DE session,” he said.
Abdul’s had a few things helping him move efficiently and expediently towards his racing goals over the last four years. Not only has he had the good sense to recognize where his strengths lie — identifying a motivating objective, making the necessary lateral moves, and dedicating himself to the cause, while having the means and the connections to get the sort of help that saves him from headaches. Since advancement has been the aim, and the specific outcome has changed slightly with time, he’s had to think about his approach constantly. Not having to worry about picking the right parts or leaving stones unturned has freed up the bandwidth needed to keep adapting to an ever-changing environment.