Bennet’s C8: Driver Mod Comes First

Bennet Kao learned quickly that the Tesla Model 3 was a capable track car with the right technique. By capitalizing on its strengths — surprisingly capable brakes and its torque and traction advantages — he could stop the car in a short distance, sacrifice the mid-corner, and prioritize a strong exit to lengthen any subsequent straight.

Good traction and a favorable weight distribution make the electric heavyweight a serious contender on the track, but it’s not without its issues. The problem is the Model 3 is only good for about two hot laps before it starts to limp. Since Bennet recognized that driving skill came before a long mod list, he prioritized seat time. Posting only eight to ten laps per track day didn’t exactly constitute time well spent, so he decided to make a change to a car which weighed less than two tons.

“I figured the gen-two BRZ was the perfect segue,” he recalled. “I wanted to learn to carry momentum and drive a manual, and since this was rear-drive, I wasn’t comfortable with having too much power at first.”

He sent his new toy to TDW Auto in San Jose for their advice and mechanical expertise; having them install a pair of Stoptech big brakes, Racecomp Tarmac 2 coilovers, and a set of Kumho V730s. With how playful the car was from factory, these were the only modifications they felt were necessary.

Transitioning into a lighter, nimbler, and less powerful car was not easy; after setting times at 2:02 at Buttonwillow 13CW and 1:27 at Thunderhill West, he had to ask himself what wasn’t working. Thankfully, he had a few friends with similar setups who offered him some help. Seigo Ma, another gen-two BRZ owner, offered Bennet his passenger seat and fielded a few questions.

“I tried to focus on the exit with the Tesla. I also braked pretty late and hard with the Tesla, but I couldn’t do that in the BRZ; it would just oversteer too much. I looked at Seigo’s data and realized he was braking a little softer and a little earlier, but released the brake earlier, carried more mid-corner speed, and got back to throttle earlier. His inputs were gentler. That way, he could keep the car settled more of the time.”

Following an adjustment period working at finding more rolling speed, he started feeling himself. “I never spun that car, and I spun everything else I’d owned. It is the most forgiving car I’ve owned — you could make coffee while you corrected the oversteer,” he joked.

He whittled his Buttonwillow 13CW time down to a 1:58 and felt pleased with himself. That glow lasted until, after two dozen track days in the BRZ, he lost fourth gear. That prompted him to start looking for a replacement. “I missed the mid-engine feeling of the Tesla, but I did not miss the weight.”

Browsing an auction site one Monday afternoon, he came across a C8 Corvette with a few enticing modifications. A Brembo BM6 big brake kit and a set of four–way KW V5 coilovers would make it possible to get back to track driving that much sooner. He placed a bid, crossed his fingers, then turned off his computer and picked up his kids from school.

The following morning, he learned he’d placed the winning bid.

At Buttonwillow a month later, he left his first DE in the C8 with mixed feelings. While the car had the directness that he’d been missing, it felt like it was going to kill him half the time. “There was so much weight in the rear and the spring rates were way too soft. I kinda hated it,” he admitted. Additionally, the power steering pump seemed to struggle in high-load corners. “Going into Riverside, the steering assistance would sometimes work intermittently. I guess the pump struggles with the forces there.” Lastly, the motor would pull some power once the intake temperatures reached 230 degrees. “I could get about five hot laps a session at full power that day, but it was pretty warm.

While it wasn’t a stellar shakedown, Bennet kept his head up by maintaining his driving-first approach to driving, he recognized that his technique, even more than his setup’s shortcomings, was to blame for his unsatisfying first track experience in the C8. “I studied a few YouTube videos from other mid or rear-engine drivers and made some changes. I began to understand that this layout was not as forgiving as an FR, which meant my steering rate had to be a lot slower, and I couldn’t trailbrake as assertively as I did with FR cars. It just needed to be balanced more delicately.”

Refining his inputs helped him dial in the turn in more consistently and, crucially, settle the rear end. After all, such an incisive front end was what he’d been longing for, and with the ability to put down power much earlier than the BRZ ever could, he began to love MR driving dynamics.

With his technique honed to his car’s liking, he looked to improve the suspension for track work while keeping the car streetable. The KW V5’s default spring rate was 7kg/7kg, and while that split’s higher than stock Z51’s 4kg/5kg, it was too soft for track usage; resulting in excessive nose dive under hard braking and a lazy rear end during transitions. While researching popular spring rates for track-oriented C8s, he found that C8 Z06/Z07 has a stiffer front relative to the rear, which would help him get a flatter, better stabilized platform.

With a 14kg/10kg arrangement, as well as a bit more rebound at the rear, the C8’s setup is now neutral with a touch of oversteer. That said, having almost 60% of the weight in the rear aids in traction zones, and he’s been able to apply the throttle very early. Even with the wheels spinning, it still generates good propulsion.

Even more impressive than his ability to jump from platform to platform and adapt rapidly, Bennet wisely avoided going down the modification rabbit hole. “There’s so much to gain from focusing on the driver mod. I don’t think I’m a naturally talented driver, but I like to do my research and I studied a lot of the fast guys from Speed SF. They coached me with their onboard videos.”

One such driver claimed that the 991.2 GT3 RS was worth three times the C8 Corvette. To challenge this claim, Bennet handed his keys to the man. That was Joe McGuigan.

After returning from setting a 1:34 lap, Joe changed his tune a little.

“With the way you have it set up, it’s one of the best mid engine cars I’ve driven,” he began, “except for the brake pads — they don’t bite or modulate well,” he said. Bennet has since replaced those XP8 pads with Endless ME20.

For the foreseeable future, Bennet hopes to get as much seat time as possible — and as a father of three, all under five years of age, it’ll be hard to find the time. He’s got his work cut out for him, but his technique-forward approach should serve him well in the medium term. Maybe, once his schedule frees up and he’s learned all there is to learn from his C8’s current configuration, he’ll spring for aero, or level up and grab the Z06.