Sam's Semi-OE Turbo Miata: Taking Advantage of Pre-COVID Pricing

I try to fight the occasional sting of envy when I walk through the Speed SF pits. One particular car made me want to crawl up inside a hole and cry—this immaculate ‘00 Miata. I’ve already bought and sold one NB Miata—a car I wasn’t completely enamored with, but after learning that Sam Tsui was able to get this car with such an incredible collection of parts for the 2022 price of a rough NB without a hardtop, I was kicking myself for not buying one a little earlier.

A couple years prior to the pandemic, Sam helped define the term “pre-COVID prices.” He’d had some fun over the prior five years in a Fiat 500 Abarth, but the high center of gravity, intrusive nanny systems, and cost of performance parts were too much after some time. He’d grown somewhat comfortable with the car, but its odd behavior in fast transitions kept him from pushing it harder. As he was starting to push hard on a regular basis as a Lemons racer, he started searching for a rawer car. Within a month, he came up on the steal of the decade.

The low costs of a Miata drew him to seek out a lightly modified NA or NB. “I wasn’t looking for something that had been pretty much completed, but that’s just how it worked out,” Sam said. At a barbecue, he learned of a sorted track car his friend was looking to sell. This car had pretty much what any track-oriented Miata needed, an immaculate exterior, and it had a special motor fitted.

The trials and tribulations of turbo Miata ownership are nothing new, but it seems that sticking to a semi-OEM route can keep the headaches to a minimum. What Sam’s friend had done was swap the entire powertrain from a Mazdaspeed Miata—the 1.8-liter turbo engine, six-speed gearbox, rear axle, and limited-slip differential. With a few bolt-on parts from Flyin’ Miata and a good tune on a standalone Hydra Nemesis EMS, the engine makes a healthy 210 horsepower and 200 lb-ft of torque. Best of all, that torque came on strong at 3,000 rpm. That really changes the driving experience. Now, the throttle is squeezed and not pounded like a veal cutlet.

It looks nearly factory because it is.

Having only a set of 15x7” Avanti Storm S1 wrapped in 205s to put that power down, Sam had to recalibrate his right foot pretty quickly lest he spin in a slow corner. “The Fiat was easier to drive; I could floor it in hairpins and it would hook without any wheelhop. With the Miata, I have to squeeze the throttle carefully in second and sometimes third gear.”

As he was looking for that added feeling of connection, he made sure to replace all the tired rubber bushings with polyurethane items. In conjunction with a stiff set of Megan Racing coilovers, the reduced slop helped him achieve a handling balance that verged on oversteer in most places. In fact, the Miata will try to spin if it’s thrown into the corner, so Sam learned to slow his steering rates down a little. Much more than the Fiat, the Miata is eager to rotate.

And stop. The brakes were replaced with the Flyin’ Miata Little Big Brake kit, which consists of Wilwood four and two-pot calipers clamping OEM rotors. For a car this light, the stock rotors are more than sufficient. On a set of 200-TW tires, the braking this 2,450-pound car is capable of will leave most folks with their mouth agape.

A basic lightweight flywheel aFactory ABS, a hard top, and a good amount of safety equipment help Sam push with confidence.

For how little he got this car for, you’d expect there to be a stripped interior, rust, or some other catch. I’m sorry to say, this car has very little wrong with it. Cosmetically, it’s about as nice as a track car should be. The interior is all in place, and there weren’t any hack cuts in the carpet to fit the rollbar, either. The hardtop is painted nicely, the wheel fitment is subtle but noticeable, and the generally understated appearance doesn't scream regularly driven track toy.

For a turbo Miata, it’s pretty robust. Sam has run nearly twenty track days with the car on the stock radiator and fan setup, only aided by a Flyin’ Miata FMIC, and it still runs cool. However, he has to watch the water temp when the ambient is pushing 100.

Though it’s been tuned to such a high standard and really doesn’t need much else, Sam left his mark on it. In addition to swapping out the bushings, he fitted the interior with an OMP wheel, a Hard Dog rollbar/harness bar, and a RaceDirect.com 6-point harness. Just a few tweaks, but enough to make it feel like it’s his. Without a doubt, this no-stone-unturned track car doesn’t need much more.