Matt Paige's C6 Z06: The Track Rat’s Idea of a Hybrid

Photo credit: APEX Staff Photographer @victorgiang

There’s something refreshing about watching the onboards Matt Paige posts all too infrequently to his YouTube page. It only takes a couple corners to see evidence of a well-sorted car in action. Soft turn-in, great traction, and a real sort of stability that gives him the reassurance to push hard are traits we can appreciate from the start of his lap linked below.

By addressing every performance-related department in more or less equal measure, the car has a wide array of strengths which make it a versatile machine most speed freaks can appreciate. It’s a car that’s civil enough for short drives on the street, despite being tuned and tweaked to drive full lapping sessions without worry.

The track-street mix doesn’t place much emphasis on comfort, but it does make sure the factory bodywork is retained while using the airflow over it more effectively. For instance, the rear brake ducts are repurposed to direct air towards the gearbox and differential.

The vented hood isn’t stock bodywork, but it does fit the whole scheme as it’s painted the same shade of yellow.

Up front, the LG Motorsports splitter removes the front airdam and, in conjunction with a vented hood, helps the hot air inside the engine bay evacuate. Downforce and cooling addressed in one fell swoop—all without disrupting the soft, curvaceous shape of the C6.

That two-birds-one-stone approach could be seen in the greater build objectives with this particular Corvette. First, Matt wanted to show what his company is capable of. Few cars really fill the dual-purposer role, but Laptimz Motorsports used all their knowhow and a considerable budget to make it a track guy’s idea of the ideal hybrid.

The second objective was to demonstrate the value of a track car that doesn’t prioritize outright speed. Even with the lap times it’s capable of, the build emphasis was on stress-free track work; the company aim is getting enthusiasts onto the track with minimal fretting and frustration.

For that reason, reliability came first. Matt strove to keep the temperatures low through a set of Setrab oil coolers and a G-Speed laydown radiator. To ensure steady lubrication at high lateral and longitudinal loads, he picked a dry sump system from Dailey Engineering. For a milder balance with a hint of push, he chose a staggered set of Apex VS-5RS wheels wrapped in wide rubber—315s up front and 345s in the rear.

That wide footprint easily harnesses the engine’s output, as this LS7 isn’t crazy-powerful by LS standards. With the help of American Heritage heads, a Katech Torquer cam, Katech valves, and a pretty mild exhaust, it makes 525 horsepower and 520 lb-ft of torque—more than enough shove for Sonoma and Thunderhill.

Unfortunately, the retention of the interior pieces and most all the factory bodywork makes this 3,000-pound middleweight a little heftier than most track cars of this caliber. Still, those lightweight wheels, SKF hubs, aluminum hubs, lighter AP Racing brakes, and LG Motorsports drop spindles trim some unsprung weight. It all contributes to a feeling of uninterrupted adhesion with the road beneath. After all, it’s not only about the total weight, but where it’s located.

Photo credit: Trevor Ryan

The result is a car that’s sure on its feet, urgent, stable, and somewhat progressive when it does break loose. Now, the use of a delicate right foot helps Matt stay out of trouble, but he has to tread carefully on cold tires—big 315s have a habit of letting go abruptly if they’re not brought up to temperature before getting abused.

A little Lexan, lightened footwork, and a carbon roof help this Corvette belie its weight.

Even when the car does slide, the fresher suspension and direct feeling through the wheel give Matt enough information to correct snaps and shimmies without breaking a sweat. Not even a slide through the middle of Sonoma’s Turn 10 seems daunting, as seen at 1:28 in the footage above. This surefootnedness helps Matt push hard without trepidation—and feel like a superhero in the process.

Without a doubt, we’d certainly have fuller fields if this is how all track toys were built.